Message from
Chairman of Central Boilers Board


About Central Boilers
Board


History of Indian Boiler Regulations

Foreword

Contents Chapter
Wise


Contents Regulation
Wise


List of Amendments

Indian Boilers
Act 1923


Ibr Forms

Home

Search

Help

Contact Us

 

Reg. 519 I, Reg. 519 J, Reg. 519 K
STANDARD CONDITIONS FOR THE DESIGN AND CONSTRUCTION OF ECONOMIZER, FEED PIPES, FEED HEATERS AND OTHER SIMILAR VESSELS

VALVES AND MOUNTINGS

(j) Hydraulic Test
 
All valves and mountings shall withstand satisfactorily a hydraulic test to the same pressure as will be applied to the economiser during its registration.

NOTE:- The working pressure shall be the highest pressure at which the economiser relief are to be set.
 


Reg. 519
J
STANDARD CONDITIONS FOR THE DESIGN AND CONSTRUCTION OF ECONOMISER, FEED PIPES, FEED HEATERS AND OTHER SIMILAR VESSELS

VALVES AND MOUNTINGS

(j) Feed Line
Alternative means of feeding the boiler other than through the economiser shall be provided.
 

Reg. 519 K
STANDARD CONDITIONS FOR THE DESIGN AND CONSTRUCTION OF ECONOMIZER, FEED PIPES, FEED HEATERS AND OTHER SIMILAR VESSELS

VALVES AND MOUNTINGS

(k) Non-return valve
 
A valve shall be provided in the hot feed line between the economiser and the boiler to prevent the discharge of steam or water from the boiler into the economiser.
 
Back   Top
Message from Chairman of Central Boilers Board About Central Boiler Board History of Indian Boiler Regulations Foreword Contents Chapter Wise Contents Regulation Wise List of Amendments
Indian Boilers Act 1923 Ibr Forms Home Search Help Contact Us