Message from
Chairman of Central Boilers Board


About Central Boilers
Board


History of Indian Boiler Regulations

Foreword

Contents Chapter
Wise


Contents Regulation
Wise


List of Amendments

Indian Boilers
Act 1923


Ibr Forms

Home

Search

Help

Contact Us

 

Reg. 397, Reg. 398, Reg. 399

ELECTRODE BOILERS

General Requirements

Application

This Chapter applies to Electrode Steam Boilers for all voltages for any working pressure and for temperatures not exceeding 650°F.

Electrode Boilers shall only be of the following construction:
(a) Riveted Steel Boilers.
(b) Fusion Welded Steel Boilers.
(c) Seamless Shell Steel Boilers.




Reg. 398

ELECTRODE BOILERS

Where applicable the general terms of Chapter I relating to certificates from makers, Inspecting Authorities, etc., and of Chapter III concerning construction shall be followed.




Reg. 399

ELECTRODE BOILERS

The material specifications for structural parts of Electrode Boilers shall comply with Chapter II as regards the process of manufacture, chemical composition, mode of manufacture and tests, and the certificates for the steel plates, rivets and bars where applicable, provided that the ultimate tensile stress and elongation of materials shall be between the limits given below:-

1) For riveted construction as in Regulation 16.
2) For fusion welded construction as in Regulation 234.
3) For seamless construction as in Regulation 344. Table I as for seamless carbon steel pipes.
 
Back   Top
Message from Chairman of Central Boilers Board About Central Boiler Board History of Indian Boiler Regulations Foreword Contents Chapter Wise Contents Regulation Wise List of Amendments
Indian Boilers Act 1923 Ibr Forms Home Search Help Contact Us