Message from
Chairman of Central Boilers Board


About Central Boilers
Board


History of Indian Boiler Regulations

Foreword

Contents Chapter
Wise


Contents Regulation
Wise


List of Amendments

Indian Boilers
Act 1923


Ibr Forms

Home

Search

Help

Contact Us

 

Reg. 395, Reg. 395 A

Submission of plans of steam-pipes

a)

Plans of steam pipes shall be submitted with the prescribed fee to the Chief Inspector before construction or at the time of registration of the boiler for his decision whether the pipes and their arrangement comply with the Regulations.
b)
(i) The fees for examination of plans and the particulars of materials, design and construction of steam pipes before the commencement of manufacture of the steam pipes shall be at the rate of Rs. 30/- for 30 meters of piping or part thereof, subject to a minimum of Rs.50/-, inclusive of all fittings excepting the fittings like de-superheaters, steam receivers, feed heaters and separately fired superheaters. For any fittings like de-superheaters, steam receivers, separators and flanges, the fee shall be Rs.150.00 for each category of such identical fittings.
ii) The fees for examination of lay out plans of steam pipes shall be Rs.20/- per 30 metres of piping or part thereof, subject to a minimum of Rs.50/-, inclusive of all fittings, except fittings like de-superheaters steam receivers, feed heaters and separately fired superheaters. For any fittings like de-superheaters, steam receivers and separators, the fee shall be Rs.150.00 for each such fittings.




Reg. 395 A

Inspection fee for boilers and parts thereof constructed in India

1)

The inspection fee for boilers shall be calculated on the following basis:

(i) at four times the registration fee for a boiler of riveted construction.
ii) at four times the registration fee for a boiler of welded construction.
2) Fees for inspections of boiler scantlings shall be charged as under:-

(i) upto 10 square feet (0.929 sq. meter) of outside surface - nil.
ii) above 10 square feet (0.929 sq. meter) of outside surface – one half of the registration fee of the boiler for which the part is intended.
3) For inspection of tubes and pipes, the fees shall be charged at the rate of Rs.150/- per metric tonne or a fraction thereof.
4) Fees for inspection of boiler at the site of construction shall be charged at the rate of four times the registration fee.”.
5) For inspection of forged pipe fittings, the fees shall be charged at the rate specified for forged and cast flanges under clause (1), of sub-regulation (2) of regulation 395 C.
6) For inspection of pipe fittings other than forged pipe fittings, the fees shall be charged as under:-

(a) Upto and including 50mm, for 100 kg. or a fraction thereof Rs. 50/-
(b) Over 50 mm and upto and including 100 mm for 450 kg. or fraction thereof. Rs. 250/-
c) Over 100 mm for 900 kg. or a fraction thereof. Rs. 500/-
 
Back   Top
Message from Chairman of Central Boilers Board About Central Boiler Board History of Indian Boiler Regulations Foreword Contents Chapter Wise Contents Regulation Wise List of Amendments
Indian Boilers Act 1923 Ibr Forms Home Search Help Contact Us