Message from
Chairman of Central Boilers Board


About Central Boilers
Board


History of Indian Boiler Regulations

Foreword

Contents Chapter
Wise


Contents Regulation
Wise


List of Amendments

Indian Boilers
Act 1923


Ibr Forms

Home

Search

Help

Contact Us

Reg. 155
STAND PIPES, PADS ETC.

Stand Pipes and Pads

Stand pipes and settings for carrying mountings shall be made of wrought, cast or fabricated steel.  These shall take the form of short stand pipes, pressed steel plate saddles, forged pads or pads cut from round rolled bar as may be most convenient and secured to the boiler by riveting or welding. Where short stand pipes are used they shall be of solid forged, fabricated or cast steel. They shall be carefully bedded to the shell before attachment and where riveted the rivets shall be so pitched as to ensure a tight joint. The jointing faces to which mountings are to be bolted shall be machined. Pads shall have sufficient thickness to allow the drilling of stud holes for mountings without the inner surface being pierced and the length of the screwed portion of the stud in the pad shall be not less than the diameter of the stud.

 
Back   Top
Message from Chairman of Central Boilers Board About Central Boiler Board History of Indian Boiler Regulations Foreword Contents Chapter Wise Contents Regulation Wise List of Amendments
Indian Boilers Act 1923 Ibr Forms Home Search Help Contact Us